Hyperliquid is a blockchain built around an exchange for perpetual futures and spot. How to get USDC in, place a small first trade, read what the screen is telling you, get your money out, and stay clear of the fake sites that copy it.
November 15, 2026
20
min to read
The short answer
To use Hyperliquid, open app.hyperliquid.xyz, connect a crypto wallet or log in with email, and deposit USDC: at least 5 USDC from Arbitrum, since smaller deposits are lost. Pick a market, choose long or short, set your leverage and margin mode, size the order and place it with a stop loss. Withdraw to your own wallet when you are done.
Hyperliquid is a blockchain built to run an exchange. On most chains, each trading app brings its own system for matching orders. On Hyperliquid, the trading is part of the chain: the order books, where buy and sell orders meet, and the margin engine that tracks every position both live onchain, in a layer it calls HyperCore. Validators, the computers that agree on each new block, run it under a consensus design called HyperBFT. For a trader close to its servers, Hyperliquid’s docs put the median time from sending an order to getting it confirmed at 0.2 seconds.
It is best known for perpetual futures, or perps. A perpetual future is a contract that follows the price of something, such as bitcoin, and never expires. You post collateral, here USDC (a stablecoin meant to stay worth one dollar), then go long if you expect the price to rise or short if you expect it to fall. You never hold the coin itself, and you can add leverage, which multiplies your exposure, gains and losses alike. Once an hour, longs and shorts pay each other a small amount called funding, which keeps the perp’s price close to the real one. Hyperliquid also runs spot markets, where you buy the token outright.
What you can trade, as of November 14, 2026, at 8:52 PM UTC:
The same chain also runs HyperEVM, a smart-contract side where outside apps live and gas is paid in HYPE. You don’t need it to trade. Two more facts change how you use the exchange: placing and canceling orders costs no gas, only a trading fee, and every address’s positions, orders and fills are public for anyone to look up.
You need a way to sign in and some USDC. Hyperliquid’s start guide lists two ways in:
With a wallet, the standard deposit is USDC on Arbitrum, an Ethereum layer-2 network, plus a little ETH on Arbitrum to pay the gas for the deposit itself. Whoever holds your wallet’s private key, or its seed phrase (the list of words that restores it), controls everything in the account. Write the phrase down on paper and keep it off any screen.
Type app.hyperliquid.xyz into the address bar yourself, then bookmark it and use only the bookmark. Search results and ads are where the fake copies wait.
Press Connect and choose your wallet, or enter your email and the code it receives.
With a wallet, press Enable Trading and sign the message. It costs no gas, and it sets up a trading key in your browser so you don’t have to confirm every order in your wallet.
Press Deposit, choose USDC on Arbitrum, type the amount and confirm in your wallet. Send at least 5 USDC: Hyperliquid’s support pages say smaller wallet deposits are lost.
It shows on the trade page. If it looks short and you already hold a losing cross-margin position, the new USDC went to cover that position’s margin first.
Those are not the only ways in. Every route has its own minimum, and Hyperliquid’s deposit pages are blunt about mistakes: send the wrong asset or use the wrong network and it may not come back.
| Route | What you send | Minimum | Who handles it |
|---|---|---|---|
| Wallet, Deposit button | USDC on Arbitrum, plus ETH there for gas | 5 USDC; less is lost | Hyperliquid |
| Email login, deposit address | USDC on Arbitrum, Ethereum, Base or Polygon | Under 5 USDC is sent back to your email wallet; under 1 USDC is lost | Across Protocol |
| Bitcoin | BTC on the Bitcoin network, about 30 minutes | 0.0003 BTC; less is lost | Unit, an independent team |
| Ethereum assets | ETH or ENA on Ethereum, about 5 minutes | 0.007 ETH or 120 ENA | Unit |
| Other networks | SOL and some Solana tokens, MON, XPL, AVAX or ZEC on their own networks | Set per asset | Unit |
| Card | A card payment that buys USDC | Set by the provider | Swapped.com, an outside provider with its own support |
Bitcoin, ETH and the other coins arrive as spot tokens, so you sell them for USDC before you can use them as margin for perps (Bitcoin, Ethereum, card). Some centralized exchanges can also send USDC straight to Hyperliquid. If yours sends it to the HyperEVM side, the money isn’t lost, but you have to move it to your trading balance with the Transfer to/from EVM button, which needs a little HYPE for gas (docs).
The trade page puts the price chart in the middle, the order book and the latest trades beside it, the order form on the right, and your balances, positions, open orders and history underneath. You choose a market with the selector at the top. Markets from HIP-3 exchanges carry a code in front of the ticker: xyz:NVDA is Nvidia on trade.xyz, a different market from NVDA on any other HIP-3 exchange.
The order form is where the decisions are. Here is each setting, what it does, and a careful choice for a first trade:
| Setting | What it does | A careful first choice |
|---|---|---|
| Long or short | A long gains when the price rises; a short gains when it falls | Your view, at a small size |
| Market order | Fills at once against the best prices on the book | Fine on deep markets such as BTC and ETH |
| Limit order | Waits on the book and fills only at your price or better | Use it when you care about the exact price |
| Leverage | Any whole number from 1 to the market’s cap; it sets how big a position your margin can hold | 2x or 3x, far below the cap |
| Margin mode | Cross shares one balance across your positions; isolated gives one position its own margin | Isolated, so a bad trade stays contained |
| Size | The full value of the position, which is your margin times your leverage | An amount you could lose in full |
| Reduce only | The order can only shrink a position, never open or flip one | On, for any order meant to close |
| TP/SL | A take profit and a stop loss attached to the trade | Always set the stop |
Beyond market and limit, Hyperliquid’s order types include stop market and stop limit orders, take market and take limit orders, scale orders that spread limit orders across a price range, TWAP orders that split a large order into slices over time, and trailing stops. A limit order that rests on the book pays the lower maker fee when it fills; an order that takes liquidity pays the taker fee.
Leverage caps vary a lot. On November 14, 2026, at 8:52 PM UTC, 89 of the 179 crypto perps capped leverage at 3x, ETH allowed 25x and BTC 40x. trade.xyz’s markets ranged from 5x to 50x. The docs add a line every beginner should read twice: leverage “is only checked upon opening a position,” and after that “the user is responsible for monitoring the leverage usage to avoid liquidation” (margining).
Margin mode decides what a loss can reach. In isolated mode, a liquidation stays inside that one position. Cross is the default mode: all your cross positions draw on one balance, so a loss on one eats into the cushion behind the others. One detail surprises people: in cross mode, the liquidation price doesn’t depend on the leverage you pick, because the whole cross balance stands behind the position; lower leverage just ties up more of it. Some markets are isolated only: 100 of trade.xyz’s 122 live markets on November 14.
Size is the same thing whether you think in dollars or in coins. With ETH at $1,816.60, a $100 position is about 0.055 ETH, and at 4x it needs $25 of margin. The smallest order Hyperliquid accepts is worth $10 (docs).
Here is a small first trade from start to finish: a $100 long on ETH, which had $1.37 billion of volume in the 24 hours to November 14, 2026, at 8:52 PM UTC, so a small order barely moves its price. The numbers use ETH’s mark price at that moment, $1,816.60.
Choose ETH in the market selector. Stick to a deep market for a first trade.
Choose isolated and 3x. That makes the trade need $33.33 of margin.
A market order fills now. A limit order a little below the price waits for a dip and may never fill.
$100, about 0.055 ETH.
For example, a stop 5% below the entry, near $1,726, and a take profit 10% above it, near $1,998. That puts about $5 at risk to aim for about $10, before fees and slippage.
It shows before you place the order. Your stop must sit well before it.
A confirmation window appears. You can tell it not to show again, but leave it on while you learn.
What the numbers look like: at 3x and isolated, Hyperliquid’s liquidation formula puts this position’s liquidation price near $1,236, a fall of about 32%, before fees and funding. The same $100 at 10x needs only $10 of margin, and its liquidation price moves up to about $1,668, a fall of 8%. At ETH’s 25x cap, a fall of about 2% is enough. A market order at the base taker fee of 0.045% costs about 4.5 cents to open and the same to close.
Both are trigger orders. They fire when the mark price, Hyperliquid’s fair-price estimate, crosses your level, not when one trade prints there. By default they go out as market orders that accept up to 10% slippage, the gap between the price you expected and the price you got, so in a fast move the fill can land well past your level. Give them a limit price instead and you control the price, but in a jump the order may not fill at all. Set from the order form, they are tied to that order and keep its size; set from an open position, they cover the whole position by default (docs). For a first trade, the rule is simpler than the mechanics: the stop goes in before the order does.
Once the order fills, the position appears in the table under the chart. Four numbers matter:
If the price moves against you, the docs list your options: close part or all of the position, add margin to an isolated position, or deposit more USDC to back a cross one. If you do nothing and your equity falls below the maintenance margin, Hyperliquid sends market orders to close the position on the book, and anything left over stays yours. If equity falls further, to two-thirds of the maintenance margin, a backstop vault takes the position over and you lose that margin too (liquidations). On a position over $100,000, the first liquidation order covers only 20% of it.
They sit side by side in the same app, and they behave differently:
| Spot | Perps on the main exchange | HIP-3 perps, such as trade.xyz | |
|---|---|---|---|
| What you hold | The token itself | A contract on a crypto price | A contract on a stock, index, commodity or currency price |
| Leverage | None | Up to each market’s cap: 3x to 40x | Set by the deployer: 5x to 50x on trade.xyz |
| Can you be liquidated? | No | Yes | Yes |
| Funding | None | Hourly | Hourly, on the deployer’s settings |
| Who sets the reference price | Trading on the book | Validators, from big exchanges’ prices | The team that deployed the market |
| Base trading fee, taker and maker | 0.070% and 0.040% | 0.045% and 0.015% | 0.090% and 0.030% on trade.xyz, twice the main rate |
The fees are Hyperliquid’s own published base rates, from its fee schedule and trade.xyz’s fee page, read on November 15, 2026. They fall as your 14-day volume grows, and staking HYPE cuts them by 5% to 40%. Some HIP-3 markets run in a growth mode at least 90% cheaper.
Spot is the plain one: you buy HYPE, or Bitcoin brought in through Unit, and you own it until you sell, with no liquidation and no funding. Perps are what most people come for, and everything in this guide so far applies to them.
HIP-3 markets are run by outside teams that each stake 500,000 HYPE. Under HIP-3, the team that deploys a market defines it, sets its oracle (the reference price) and its leverage limits, and can settle it if needed; Hyperliquid supplies the order books and the margin engine. trade.xyz, the largest, lists perps such as xyz:NVDA, xyz:SP500 and xyz:GOLD, and they trade around the clock, with their own pricing rules for nights and weekends. Our guide on how to trade stocks on Hyperliquid covers those markets in full.
Which balance pays for what depends on your account mode. Hyperliquid’s docs recommend unified mode for most people: one USDC balance covers perps on the main exchange, perps on trade.xyz and spot trades priced in USDC. Standard mode splits them up, and you transfer USDC from one to another yourself.
It sits at the bottom right of the trade page.
For USDC, the standard destination is Arbitrum, sent to your own address. Coins that came in through Unit, such as Bitcoin, go back out through Unit to their own network.
Both show in the withdrawal window. Hyperliquid’s support pages say a USDC withdrawal needs 1 USDC to cover it, and its bridge docs say an Arbitrum withdrawal arrives in a few minutes.
The Portfolio page lists it under deposits and withdrawals as pending, completed (with a link to the block explorer) or failed.
Three more things can hold a withdrawal up:
Two places deserve most of your attention: the address bar and the leverage setting.
The risks in Hyperliquid itself, such as its bridge, its validators and past incidents, are covered in is Hyperliquid safe?
If you want to rehearse first, Hyperliquid runs a testnet, a copy of the exchange with play money. Its faucet gives 1,000 mock USDC to addresses that have made a deposit on the real exchange. Our guide to paper trading crypto shows how far the testnet’s market drifts from the real one.
Yes. Ethy is an AI trading agent you ask before you trade, and it can place Hyperliquid perp trades for you from a chat. What changes is where the money starts and who works the order form.
It trades Hyperliquid’s main exchange and trade.xyz only. It doesn’t place Hyperliquid spot orders, and it doesn’t trade other HIP-3 exchanges.
5 USDC. From a wallet, Hyperliquid’s support pages say USDC deposits below 5 are lost. With an email login, deposits under 5 USDC are sent back to your email wallet and under 1 USDC are lost. Coins that come in through Unit have their own minimums, such as 0.0003 BTC.
Hyperliquid’s bridge docs say a USDC withdrawal to Arbitrum arrives in a few minutes, and the app shows an estimate before you confirm, and the support pages say it needs 1 USDC to cover it. The withdrawal window shows the fee and a time estimate for the route you choose; if it runs past the estimate, the docs say it is usually network congestion.
At the base tier, perps cost 0.045% for taker orders and 0.015% for maker orders, spot costs 0.070% and 0.040%, and trade.xyz’s HIP-3 markets twice the perp rate, per Hyperliquid’s and trade.xyz’s docs on November 15, 2026. Rates fall with 14-day volume and HYPE staking. Placing orders costs no gas; deposits pay their network’s gas.
Withdraw moves your funds off Hyperliquid to an address on another network, such as Arbitrum. Send moves them to another address on Hyperliquid itself. Sending to an exchange’s deposit address leaves the funds where only that exchange can reach them, so use Withdraw for exchanges.
Yes. Hyperliquid’s start guide lists phone apps that connect to it, such as MetaMask, Phantom and Dexari, and the web app works on a phone. You can also link app.hyperliquid.xyz on your phone to your desktop wallet by scanning a QR code from the desktop app.
Yes, on its testnet, a copy of the exchange that runs on play money. Its faucet gives 1,000 mock USDC to addresses that have already deposited on the real exchange. If you log in with email, your testnet address differs from your mainnet one, so export the email wallet first.
When your equity falls below the maintenance margin, Hyperliquid closes the position with market orders on the book, and any collateral left stays with you. If equity falls to two-thirds of the maintenance margin first, a backstop vault takes the position and the remaining margin is lost. The docs’ advice is a stop loss, or closing the position before the mark price reaches the liquidation price.
Trading involves risk, including the loss of your money. Ethy AI is a research and trading tool and does not give investment advice or recommendations. Backtests are simulations on historical data and do not predict future results.
Deploy your AI trading agent in one click.
