Hyperliquid

Hyperliquid liquidation price: the formula and a real-market table

Hyperliquid liquidates a position when its equity falls below the maintenance margin, at a price the exchange works out from one formula. Here is that formula, isolated and cross, how margin tiers change it, and what it looks like on real markets, not just BTC, at several leverage levels, from data read on November 16, 2026.

[

November 16, 2026

]
•
[

13

 

min to read

]

The short answer

Hyperliquid computes a liquidation price from one formula: price minus a side term times your spare margin, divided by position size and by a maintenance term. Maintenance margin, the floor that triggers it, is half the initial margin at the market’s own maximum leverage, so the same leverage liquidates sooner on a market with a lower leverage cap.

What is a liquidation price on Hyperliquid?

Your liquidation price is the price at which Hyperliquid closes your position by force, because your equity has fallen below the minimum it allows a position to run on. Our guide to perpetual futures covers that mechanic in general, with a BTC example worked all the way through; this page stays on Hyperliquid’s own numbers and takes it further, across other markets and leverage levels, using the venue’s own formula.

Two things decide where that price sits: how much spare margin stands behind the position, and how much of it Hyperliquid requires you to keep as a floor, called the maintenance margin. Everything below follows from those two numbers.

What is the exact formula Hyperliquid uses to compute a liquidation price?

Hyperliquid’s liquidation docs give one formula that covers both a long and a short, and both isolated and cross margin:

liq_price = price − side × margin_available ÷ position_size ÷ (1 − l × side)

Four pieces make it up:

  • side is 1 for a long and −1 for a short. It is the only thing in the formula that changes between the two, which is why one equation answers both: flip the sign and the price moves the other way.
  • l is the maintenance rate: 1 divided by what the docs call the maintenance leverage, and equal to half the rate your initial margin uses at the market’s own maximum leverage (the next section covers this in full).
  • margin_available is your spare room above the floor. In isolated margin it is the margin you assigned to that one position minus the maintenance margin it must keep. In cross margin it is your whole account’s value, unrealized profit and loss included, minus that same maintenance margin.
  • position_size is the position in coins or contracts, not dollars.

Isolated and cross use the identical equation; only margin_available changes. That single difference is why the two modes can put the liquidation price on completely different sides of the market, which the isolated-versus-cross section below works through with real numbers.

Hyperliquid’s margining docs add the rule that sets an isolated position’s starting margin: initial margin is simply the position’s value divided by your chosen leverage, and “leverage is only checked upon opening a position.” Nothing recalculates your leverage afterward; the market moving, or funding being paid, changes your equity instead, and that equity is what the liquidation formula compares against the floor.

How does maintenance margin follow a market’s maximum leverage?

The maintenance rate, l in the formula, is not a fixed number across Hyperliquid. The docs put it plainly: maintenance margin “is half of the initial margin at max leverage,” which the liquidation docs say works out to “between 1.25% (for 40x max leverage assets) and 16.7% (for 3x max leverage assets).” trade.xyz markets can sit above that range: xyz:EUR allows 50x, so its maintenance margin is lower still. A market’s own cap sets how tight its floor is; your personal choice of leverage, lower or higher, never changes that floor, only how much margin you post against it.

That is the idea behind the table in the next section: put the same leverage on seven different real markets, and the distance to liquidation still differs by market, because each one’s maintenance rate comes from its own cap, not from the 10x everyone in the table happens to be using.

ETH2.00%SOL2.50%HYPE5.00%NVDA5.00%GOLD2.00%XYZ1001.67%EUR1.00%ETH2.00%SOL2.50%HYPE5.00%NVDA5.00%GOLD2.00%XYZ1001.67%EUR1.00%
The maintenance margin rate on seven Hyperliquid and trade.xyz markets, from each market’s own maximum leverage, read November 16, 2026.Hyperliquid public API, metaAndAssetCtxs (default dex and dex “xyz”), read November 16, 2026

Margin tiers: the cap itself can shrink as a position grows

On top of that, a market’s maximum leverage is not always one fixed number. Margin tiers lower the cap once a position’s notional value, in dollars, crosses a threshold, and the maintenance rate rises to match, by the docs’ own rule: the maintenance rate at a given tier is half the initial-margin rate at that tier’s own maximum leverage. A deduction keeps the dollar amount continuous as a position crosses from one tier into the next, the same way a progressive tax bracket avoids a sudden jump at the line, rather than resetting the whole position to the new rate at once.

Two tiers, read from Hyperliquid’s docs on November 16, 2026: SOL allows 20x up to $70 million of position value and 10x at or above it, and XRP allows 20x up to $40 million and 10x at or above it. The page names tiers for more than 30 of the main exchange’s crypto markets, ETH, SOL and HYPE among them (HYPE drops from 10x to 5x above $20 million); it names no trade.xyz or other HIP-3 market, so the four trade.xyz markets in this guide’s tables carry one fixed cap each, and the figures for the three crypto ones assume a position below their first threshold. One detail worth knowing before you assume a tier cannot reach you: the threshold is set by the position’s current notional value, which rises with the price even if you never add to the position, not only by how much margin you chose to post.

Pulling this live from the API means reading a market’s own current maximum leverage, not assuming the number you saw last week still holds; HIP-3 deployers such as trade.xyz, which HIP-3 lets set their own leverage limits, can and do change them.

What is the liquidation price on real Hyperliquid markets right now?

Ten times leverage, isolated margin, no fees or funding counted in: here is where a long and a short on seven different markets get liquidated, using Hyperliquid’s own formula on prices its public API returned on 2026-11-16. None of them is BTC; three are crypto on the main exchange and four are trade.xyz perps on a stock, a commodity, an index and a currency.

A 10x isolated position on seven Hyperliquid and trade.xyz markets, long and short, 2026-11-16
MarketMax leverageMaintenance marginMark priceLong liquidated nearLong: move against youShort liquidated nearShort: move against you
ETH25x2.00%$1,796$1,6498.16%$1,9367.84%
SOL20x2.50%$70.67$65.247.69%$75.847.32%
HYPE10x5.00%$66.29$62.805.26%$69.444.76%
xyz:NVDA (Nvidia)10x5.00%$160.11$151.685.26%$167.734.76%
xyz:GOLD (gold)25x2.00%$3,864$3,5488.16%$4,1677.84%
xyz:XYZ100 (an index)30x1.67%$27,714$25,3658.47%$29,9868.20%
xyz:EUR (the euro)50x1.00%$1.1031$1.00289.09%$1.20148.91%

Every row uses the same 10x. The spread in the two “move against you” columns, from a little over 4.7% to a little over 9%, comes entirely from the maintenance margin chart above: HYPE and NVDA happen to be at their own 10x cap already, so they carry the highest maintenance rate in the table, while xyz:EUR’s 50x cap gives it the lowest maintenance rate here and the most room at the same 10x. A short needs a smaller move than a long on every row, because the (1 − l × side) term in the formula works slightly against it; the gap is a few tenths of a percent at 10x and narrows at higher leverage, which the next table shows directly.

How much does leverage change the liquidation price on one market?

Now hold the market fixed and move the leverage. xyz:EUR is a fair pick: Hyperliquid lists it as isolated-only, so every position on it, however you reach the market, already uses the margin mode this table assumes.

Liquidation price on xyz:EUR by leverage, isolated margin, mark price $1.1031, 2026-11-16
LeverageMargin on a $1,000 positionLong liquidated nearLong: move against youShort liquidated nearShort: move against you
2x$500.00$0.557149.49%$1.638348.51%
5x$200.00$0.891419.19%$1.310618.81%
10x$100.00$1.00289.09%$1.20148.91%
20x$50.00$1.05854.04%$1.14683.96%
50x$20.00$1.09201.01%$1.11400.99%

At 2x, a long has to be wrong by roughly half the price before it is liquidated; at 50x, the market’s own cap, that room shrinks to about 1.0%, a small move for a leveraged position. The maintenance rate itself never changes across this table, because xyz:EUR’s maximum leverage stays 50x throughout; what changes is only how much of the position your own margin covers before that floor is reached. That is what leverage buys you: more exposure for the same money, paid for with less room before Hyperliquid closes the trade for you.

Isolated or cross: which one moves your liquidation price more?

Both tables above use isolated margin, where only the money you assigned to that position stands behind it. Cross margin changes the one input that matters: margin_available comes from your whole account’s value instead of from a position’s own margin, and the docs are specific about what that means for a cross position: it is liquidated “when the account value (including unrealized pnl) is less than the maintenance margin times the total open notional position,” with no mention of the leverage you picked at all.

A worked example on HYPE, which allows cross margin: say you open a $5,000 HYPE position while your account carries $1,300 of total value, at a mark price of $66.29. Run the same formula with that account value standing in for margin_available’s starting point, and the position is liquidated near $51.63 on a long (a move of about 22.1%) or near $79.54 on a short (about 20.0%). Change only how that $1,300 splits across other open positions, and both numbers move with it, because every cross position draws on the same pool. Isolated margin makes the opposite trade: a loss on one position can never touch the margin behind another.

Two more rules worth keeping in view, both from Hyperliquid’s own docs and both the same regardless of margin mode. You can only pull out unrealized profit if what remains covers at least 10% of the total notional value of all your open positions, per the margining docs. And if the order book cannot close a liquidated position fast enough, a backstop takes it over once equity drops to two-thirds of the maintenance margin; before that, on the book, the first liquidation order on anything over $100,000 of notional covers only 20% of it, and any further one in the next 30 seconds covers the whole position; our guides to perpetual futures and whether Hyperliquid is safe cover that backstop and what has triggered it in practice.

How does Ethy show your liquidation price before you trade?

Ethy is an AI trading agent you ask before you trade, and it can put this number in front of you before a perp order goes through, not after. When you open a position from chat, new accounts see a confirmation card with the notional and margin, the leverage you chose next to the market’s own cap, the live mark price, and an estimated liquidation price fetched at that moment, alongside your take profit and stop loss if you set them. Nothing is placed until you confirm, unless “Execute without confirmation” is on in your settings.

Ethy also picks the margin mode for you, matching what Hyperliquid allows on that specific market: cross on the main exchange’s crypto, isolated on any market Hyperliquid lists as isolated-only, xyz:EUR among them. You cannot switch it per position, so the xyz:EUR table above matches what you would see in the app, while a crypto position such as HYPE is cross, like the worked example.

How do you stay away from your liquidation price?

  1. Pick the leverage from the stop, not the other way around.

    Decide where the trade is wrong first, then choose leverage low enough that the liquidation price sits well past that point, not just past where you expect the market to go.

  2. Use isolated margin when you want a loss contained.

    It keeps one bad position from drawing on the rest of your account, at the cost of a liquidation price that sits closer to the market than the same trade would see in cross.

  3. Mind the market’s own cap, not only your chosen leverage.

    A market near its own cap, or past a margin tier’s threshold, carries a higher maintenance rate no matter how conservatively you size the position.

  4. Set the stop before the trade, not after.

    A stop loss placed well ahead of the liquidation price means you choose where the trade ends. Without one, Hyperliquid’s formula chooses for you, at the worst point of the move.

  5. Recheck the liquidation price after it can move.

    In cross margin, every other position you hold and every funding payment you receive or pay shifts it; read the live figure in the app rather than the one you saw at entry.

Summary

  • Hyperliquid computes a liquidation price from one formula that covers both a long and a short: price minus a side term times your spare margin, divided by position size and by a maintenance term.
  • Maintenance margin is half the initial-margin rate at the market’s own maximum leverage, from about 1.25% on a 40x market to 16.7% on a 3x one.
  • At the same 10x leverage, isolated, seven real Hyperliquid and trade.xyz markets would liquidate a long after a move of about 5.3% to 9.1%, purely because each market’s own cap sets its own maintenance rate.
  • On one market, xyz:EUR, raising leverage from 2x to its 50x cap shrank a long’s room from about 49% to about 1.0%.
  • An isolated position’s liquidation price comes from that position’s own margin; a cross position’s comes from your whole account’s value, with no dependence on the leverage you chose.
  • Margin tiers lower a market’s maximum leverage, and raise its maintenance rate, once a position’s dollar size crosses a threshold; Hyperliquid names tiers for its largest crypto markets, not for HIP-3 markets such as trade.xyz.
  • Ethy shows an estimated liquidation price, fetched live, on its perp confirmation card, and sets isolated or cross margin to match what Hyperliquid allows on that market.

Questions people ask

What is a liquidation price on Hyperliquid?

The price at which Hyperliquid closes your position by force, because your equity has fallen below the maintenance margin it requires. It is computed from one formula that covers both isolated and cross margin, and both a long and a short position, using the market’s own maximum leverage to set how tight that floor is.

How is the liquidation price calculated on Hyperliquid?

Hyperliquid’s docs give the formula as price minus a side term (1 for long, −1 for short) times your spare margin above the maintenance floor, divided by your position size, divided by one minus the maintenance rate times that same side term. The maintenance rate is half the initial-margin rate at the market’s own maximum leverage.

What is Hyperliquid’s maximum leverage?

It differs by market and is checked only when you open a position. Across the seven markets read for this guide on November 16, 2026, caps ranged from 10x (HYPE and xyz:NVDA) to 50x (xyz:EUR); Hyperliquid’s own docs cite a 3x-to-40x range for its main exchange crypto markets, and HIP-3 teams such as trade.xyz set their own caps on top of that.

What are Hyperliquid margin tiers?

A rule that lowers a market’s maximum leverage, and raises its maintenance margin rate, once a position’s notional value in dollars crosses a threshold. Hyperliquid names tiers for more than 30 of its crypto markets, such as SOL (20x under $70 million, 10x at or above) and XRP (20x under $40 million, 10x at or above); its margin tiers page names no HIP-3 market.

Does Hyperliquid’s leverage change my liquidation price the same way on every market?

No. The same chosen leverage lands at a different distance from liquidation on different markets, because the maintenance rate behind the formula comes from each market’s own maximum leverage, not from the leverage you personally picked. A market already near its own cap carries a higher maintenance rate than one with plenty of headroom above the leverage you are using.

Is the liquidation price different for a cross position than an isolated one?

Yes. An isolated position’s liquidation price depends on the margin you assigned to it. A cross position’s depends on your whole account’s value, and Hyperliquid’s docs state the cross rule without reference to leverage at all: a cross position is liquidated once account value falls below the maintenance margin times its total notional.

How does Ethy show my liquidation price?

On its perp confirmation card, which new accounts see before a perp order goes through: the mark price and an estimated liquidation price, fetched live, next to the notional, margin and leverage you chose against the market’s cap. Ethy also sets cross or isolated margin for you, matching whatever Hyperliquid allows on that specific market.

Sources

  1. Hyperliquid Docs: Liquidationshyperliquid.gitbook.io
  2. Hyperliquid Docs: Margininghyperliquid.gitbook.io
  3. Hyperliquid Docs: Margin tiershyperliquid.gitbook.io
  4. Hyperliquid Docs: HIP-3, builder-deployed perpetualshyperliquid.gitbook.io
  5. Hyperliquid Docs: Info endpoint for perpetuals (metaAndAssetCtxs)hyperliquid.gitbook.io
  6. Hyperliquid public API: metaAndAssetCtxs, default dex and dex “xyz” (read November 16, 2026)api.hyperliquid.xyz

Trading involves risk, including the loss of your money. Ethy AI is a research and trading tool and does not give investment advice or recommendations. Backtests are simulations on historical data and do not predict future results.

Ethy blog

Read more

The $ETHY ecosystem

Stop watching charts.
Start living.

Deploy your AI trading agent in one click.