Where TP/SL lives in the Hyperliquid app, which price sets a stop off, how it fills, what the native trailing stop does, where traders put stops, and how to keep a stop clear of your liquidation price, with a worked ETH example.
November 15, 2026
18
min to read
The short answer
To set a stop loss on Hyperliquid, tick Take Profit / Stop Loss in the order form, or use the TP/SL column of your open position, and enter a trigger price or a loss. Stops trigger on the mark price, not the last trade, and fill as market orders with up to 10% slippage unless you set a limit.
A stop loss closes a position when the price moves against you as far as you decided to risk. A take profit closes it when the price reaches your target. On Hyperliquid both are trigger orders: they stay off the order book until the price reaches your level, then send an order. There are four ways to set them in the Hyperliquid app (labels as of November 2026):
In the order form, pick Market or Limit, then Buy / Long or Sell / Short, set the size and tick Take Profit / Stop Loss. Fill in TP Price and SL Price, or type a Gain and a Loss and let the app work out the prices. Then Place order.
In the Positions table, use the TP/SL column of that position. The TP/SL for Position window covers the whole position by default; tick Configure Amount to cover only part of it.
From the Pro menu of the order form, pick Stop Market or Stop Limit for a stop, or Take Market or Take Limit for a target. Set the trigger price and the size, and tick Reduce Only so the order can only shrink your position.
Placed TP/SL orders show on the TradingView chart, and you can drag them to a new price. The app refuses a drag that would make the order execute at once.
Once set, the orders wait in the Open Orders table with their trigger conditions. The app’s help text adds that take profit and stop loss orders on a position cancel themselves once the position is closed.
Hyperliquid triggers TP/SL orders on the mark price, not on the last trade. The mark price is Hyperliquid’s estimate of the fair price, and its docs define it as the median of three numbers:
It updates about every three seconds and also drives margin, liquidations and unrealized profit and loss. Because two of the three inputs lean on prices from outside Hyperliquid’s order book, a quick wick on the chart may not set your stop off if the mark didn’t follow. Hyperliquid’s support page puts it plainly: trade price and mark price are different. On trade.xyz’s stock and commodity perps, stops trigger on trade.xyz’s own mark price, built from its oracle and the book.
| Stop market | Stop limit | |
|---|---|---|
| At the trigger | A market order is sent | A limit order is placed at your limit price |
| The fill | Against the book, with up to 10% slippage allowed | At your limit or better, or not at all |
| What can go wrong | A fill well past the trigger in a fast move | No fill if the price jumps past your limit |
| Suits you when | Getting out matters more than the price | The price matters more than getting out |
Hyperliquid’s own example: a stop on a long with its trigger and its limit both at $10 goes to the book when the mark falls below $10. If the price drops from $11 to $9 in one move, the order will likely rest at $10 and not fill. With the limit at $8 instead, it would likely fill somewhere between $9 and $8. A stop limit needs room between its trigger and its limit, sized to how fast the market can move.
Two numbers from the app’s help text: your Max Slippage setting only covers market orders sent from the order form, while closing a position at market allows up to 8% and market TP/SL orders up to 10%.
A reduce-only order can only shrink your position; it never opens one in the other direction. Turn it on for every stop or target you place as a separate order. A separate stop without it is an ordinary order: if it fires after you closed the position by hand, or for more than you hold, it opens a new position the other way.
Hyperliquid has two kinds, and they behave differently enough that its docs tell you to read the second one carefully “to avoid unexpected outcomes.”
| TP/SL on the position | TP/SL on an order | |
|---|---|---|
| Where you set it | The TP/SL column of the Positions table | The TP/SL box of the order form, with the order |
| How much it closes | The whole position at the moment it fires, unless you configure an amount | A fixed size: the size of the order it came with |
| When it goes live | At once | Only once the order has fully filled |
| If you cancel the order | Not affected | Canceled too, even after a partial fill |
The trap is the limit order that only partly fills. Say you place a limit buy for 1 ETH with a stop attached, half fills, and you cancel the rest. The stop goes with it, and the half ETH you hold has no stop until you add one on the position. There is one exception in the docs: if the order is canceled for lack of margin after a partial fill, the TP/SL is placed as if it had fully filled.
In the TP/SL for Position window, tick Configure Amount and set a size, so the take profit closes part of the position, then set the rest at other prices; separate reduce-only Take Limit or Take Market orders work too. The app suggests this for large positions, because partial orders at several prices cut the slippage of one big market exit. A configured size stays fixed however the position changes, so update it when you add to or trim the trade.
Yes. Hyperliquid added a native trailing stop on September 21, 2026, for perp markets only. It sits in the Pro menu of the order form, and in the Positions table as Trailing, among the ways to close a position, which opens a Set Trailing Stop window. Its settings:
From activation, the order records a watermark: the highest mark price for a stop that closes a long, the lowest for one that closes a short. The trigger sits one retracement away from the watermark and only moves when a new watermark is set, never back. When the mark pulls back to it, Hyperliquid triggers a market order. Hyperliquid’s own example, a long with the mark at 100 and a retracement of 10:
| Mark price | Highest mark | Trigger | What happens |
|---|---|---|---|
| 100 | 100 | 90 | Tracking starts |
| 110 | 110 | 100 | A new high raises the trigger |
| 105 | 110 | 100 | The trigger holds |
| 120 | 120 | 110 | Another new high raises it again |
| 110 | 120 | 110 | A market sell closes the long |
Three things to know. It fires as a market order, so in a fast fall it can fill below its trigger. From the Pro menu it can also open a position, for example a long once the price bounces a set distance off a low; set from the Positions table, it only closes. And it trails by a fixed distance or percentage, so a stop that widens and narrows with volatility, like the three-ATR stop in our backtests of six Hyperliquid strategies, still needs a bot or agent that moves it.
There is no correct distance, only a trade-off. Too tight, and the market’s normal noise takes you out; too wide, and each loss is large. These are the usual methods, often combined:
The table shows why one percentage doesn’t fit every market. It uses each market’s 14-day ATR at the November 13, 2026 close, from Hyperliquid’s daily candles, and its maximum leverage on November 14, 2026.
| Market | Daily ATR | ATR as % of price | Max leverage | Room before liquidation at 10x | That room in ATRs |
|---|---|---|---|---|---|
| BTC | $2,443 | 3.6% | 40x | 8.9% | 2.5 |
| ETH | $99.08 | 5.1% | 25x | 8.2% | 1.6 |
| SOL | $4.44 | 5.7% | 20x | 7.7% | 1.4 |
| HYPE | $4.81 | 6.7% | 10x | 5.3% | 0.8 |
| xyz:NVDA (Nvidia) | $10.42 | 6.5% | 20x | 7.7% | 1.2 |
| xyz:GOLD (gold) | $74.71 | 1.9% | 25x | 8.2% | 4.2 |
| xyz:SP500 (S&P 500) | $110 | 1.5% | 50x | 9.1% | 6.2 |
The room is how far the price can move against an isolated long at 10x before liquidation, from Hyperliquid’s formula, with no fees or funding. On HYPE, whose maximum that day was 10x, a 10x long had 5.3% of room, less than one ordinary day’s move. A 3% stop was inside one day’s ATR on BTC, ETH, SOL, HYPE and NVDA, and about 2 days’ worth on the S&P 500.
Pick the stop first, then the size: decide the dollar loss you accept if the stop is hit and divide it by the stop’s distance. A $100 loss limit with a stop 5% away allows a $2,000 position, whatever the leverage. Leverage only changes how much margin that position ties up, and how close liquidation sits.
A stop has to fire before liquidation, or it never fires. Hyperliquid liquidates a position when your equity falls below the maintenance margin, half the initial margin at the market’s maximum leverage: 1.25% of the position on a 40x market, up to 16.7% on a 3x one. For an isolated long with no fees or funding, the docs’ formula comes down to a distance you can work out before you trade: the price can fall (1 ÷ leverage − m) ÷ (1 − m), where m is that maintenance rate. Our liquidation price guide runs that formula across seven real markets and several leverage levels, not just ETH.
On November 14, 2026, at 8:52 PM UTC, ETH’s mark price was $1,816.60 and its maximum leverage 25x, so its maintenance margin was 2% of the position. Its 14-day ATR at the November 13 close was $99.08. Take a $10,000 isolated ETH long at that price, with a stop one ATR below the entry ($1,717.52) or two ($1,618.43):
| Leverage | Margin | Liquidation price | Below entry | Stop at $1,717.52 | Stop at $1,618.43 |
|---|---|---|---|---|---|
| 3x | $3,333 | $1,235.78 | 32.0% | Yes, before liquidation | Yes, before liquidation |
| 5x | $2,000 | $1,482.94 | 18.4% | Yes, before liquidation | Yes, before liquidation |
| 10x | $1,000 | $1,668.31 | 8.2% | Yes, before liquidation | No: liquidated first |
| 20x | $500 | $1,760.99 | 3.1% | No: liquidated first | No: liquidated first |
| 25x | $400 | $1,779.53 | 2.0% | No: liquidated first | No: liquidated first |
At 10x, the two-ATR stop sits below the liquidation price of $1,668.31, so the position is liquidated before the stop can act. The fix is less leverage, not a closer stop for its own sake: choose the stop, then use leverage low enough that liquidation sits well beyond it, since fees, funding and a fast market all move it closer.
It matters even when you would be stopped out anyway. If a liquidation can’t be filled on the order book and your equity drops below two-thirds of the maintenance margin, the liquidator vault takes over the position and the maintenance margin is not returned. Hyperliquid’s own advice is to place stop loss orders, or exit, before the mark price reaches your liquidation price.
The table assumes isolated margin, where only the position’s own margin counts. In cross margin your whole account backs the position, and the docs say its actual liquidation price then doesn’t depend on the leverage you set: a cross position at lower leverage simply uses more collateral. Funding and losses on your other positions move that price, so read Liq. Price in the Positions table, not the estimate you saw when you opened, and check it again when your other positions move.
trade.xyz’s perps on stocks, indices and commodities trade around the clock, but their price only follows the outside market while that market is open. Three rules from trade.xyz’s docs decide what your stop does outside those hours:
For your stop, that means a stop more than about 14% below Friday’s last outside price on NVDA can’t trigger over the weekend. If it triggers at the Sunday reopen, it fills at whatever the book offers then, which can be far past its level. A stop doesn’t protect you from a gap. The bounds hold liquidations back the same way: trade.xyz says a position whose liquidation price lies outside them can’t be liquidated while they apply, so that risk also waits for the reopen. Our guide to trading stocks on Hyperliquid covers the rest of how these markets price.
When a stop seems to fail, it is usually one of these. Most come from Hyperliquid’s docs and its support page on TP/SL.
| What you saw | The likely cause | What to do |
|---|---|---|
| The chart touched my stop and nothing happened | Stops trigger on the mark price, which didn’t reach your level | Read the mark, not the last trade; leave room past obvious levels |
| It triggered but didn’t fill | A stop limit whose limit the price jumped past | A stop market, or more room between trigger and limit |
| It filled far past my trigger | A market stop in a fast or thin market, which can slip up to 10% | Smaller size, a stop limit with room, or exits in parts |
| My take profit closed at a loss | It triggered on the mark at a profit, then filled worse on the book | A limit price on the take profit |
| The stop never showed up | A TP/SL tied to a limit order that didn’t fully fill | Set it on the position once you hold it |
| It closed only part of my position | A TP/SL with a configured size, set before you added more | Update the size, or use the whole-position default |
| The order was rejected | A trigger on the wrong side: a stop that sells must sit below the price, one that buys above it | Check which side of the market the trigger sits on |
| A stock perp stop didn’t fire over the weekend | trade.xyz’s weekend bounds kept the mark from reaching it | Size for the Sunday reopen; a stop won’t cover a gap |
Ethy is an AI trading agent you ask before you trade. It reads the chart on four timeframes, daily, 4-hour, 1-hour and 15-minute, so you can ask where the last swing low is or how many ATRs a stop sits from the price. It can also place the protection for you on Hyperliquid perps, crypto on the main exchange and trade.xyz’s stocks, indices and commodities:
Yes. TP/SL orders and trailing stops are held by Hyperliquid itself, not by your browser. The exception the docs name is Chase orders, which run in the browser tab where you created them.
No. A stop market order fills against the book, and Hyperliquid allows up to 10% slippage on market TP/SL orders. A stop limit fills at your limit or better, or not at all. In a gap, such as a stock perp reopening on Sunday evening, either kind can end up far from your trigger.
Yes. In the TP/SL for Position window, tick Configure Amount to set a take profit for part of the position, and add others at different prices, or place separate reduce-only Take Limit or Take Market orders. A size you configure stays fixed, so update it when the position changes.
A stop loss is an exit at a price you chose, and you keep what is left of your margin. Liquidation is Hyperliquid closing the position by force once your equity falls below the maintenance margin, and in a backstop liquidation that margin is lost. A stop placed before the liquidation price keeps the exit yours.
A separate stop can if it isn’t reduce-only: if it fires after the position is gone, or for more than you hold, it opens a trade the other way. A trailing stop from the Pro menu can also open a position on purpose. TP/SL set on a position only closes it.
No. Hyperliquid triggers TP/SL orders on the mark price, the same fair-price estimate it uses for margin and liquidations. trade.xyz’s perps use trade.xyz’s own mark price for their triggers. A short spike in the last trade alone may not move the mark enough to set off your stop.
Trading involves risk, including the loss of your money. Ethy AI is a research and trading tool and does not give investment advice or recommendations. Backtests are simulations on historical data and do not predict future results.
Deploy your AI trading agent in one click.
